Forum Discussion

New Contributor

1 year ago

5CEBA7F27C8N_Power Consumption for VREFB[3..8]AN0

Hello, For 5CEBA7F27C8N FPGA, there are voltage reference pins as below. VREFB3AN0 VREFB3BN0 VREFB4AN0 VREFB5AN0 VREFB5BN0 VREFB6AN0 VREFB7AN0 VREFB8AN0 In Pin Connection Guidelines(PCG-010...

Regular Contributor

1 year ago

Hi ShivaKi,

The current consumption of a Cyclone V VREF pin is typically very minimal. You can check the maximum leakage current for the IO pins , is 30uA,

Page no: 13

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/hb/cyclone-v/cv_51002.pdf

You may also check: https://cdrdv2.intel.com/v1/dl/getContent/655051?explicitVersion=true&fileName=cyc_c51008.pdf

Regards,

Fakhrul

Forum Discussion

5CEBA7F27C8N_Power Consumption for VREFB[3..8]AN0

Recent Discussions

Feasibility to implement 350MHz LVDS + soft-CDR on Cyclone 10LP

Question

Will serialization factor of 6 in LVDS serdes IP be supported in the future on Agilex5?

1.8 V LVDS Receiver Timing Specifications for Intel MAX 10 Dual Supply Devices

Avalon-ST configuration with Agilex 3 fails