Forum Discussion
New Contributor10M04SCU169I7G issue.
The Malaysian factory feedback the following material issue.Regarding the defective parts, re-balling has been performed, but the problem persists.Please help analyze, confirm, and resolve this issue.
Details are attached.
NSY production found 19pcs of PCBA (KNA-68010-0000-51-3MC1) with Program Altera failure which is related to the defective P/N 1060-8520 FPGA (U21).
Voltage measurement on V_3V3_S5 (R60) which is associated with the affected component showed 1.5V instead of the expected 3.3V.
The impedance value of the related passive component was measured & no abnormal values were found.
Currently, 7pcs of the 1060-8520 FPGA (U21) have been reworked and the units passed the retest
The remaining boards are currently on hold in production line and pending further disposition. Kindly advise on the next action.
PN:1060-8520
MPN:10M04SCU169I7G
DC：2546/2539/2549
FR:25/846 2.96%
6 Replies
AqidAyman_AlteraRegular Contributor
Hello,
Is my understanding correct that you want to proceed with Failure Analysis on this device?
If yes, I will need you to complete this form in the next comment.
Regards,
Aqid- AqidAyman_Altera
Please revert back to me through private message once you have filled this form.
NeilzhangPlease refer to the attachment.
- AqidAyman_Altera
Thank you for your fast action. I have opened a case, and I will get back to you once I get any updates.
I appreciate your patience.
- AqidAyman_Altera
Hello,
I have sent you the updates of this FACR request through Private Message.
Kindly check your inbox.
Regards,
Aqid
- AqidAyman_Altera
Hi,
Can you confirm that you are receiving the instructions to proceed with the FACR in the private message?
Regards,
Aqid
