Forum Discussion

toni771's avatar
toni771
Icon for New Contributor rankNew Contributor
5 months ago

Stratix 10 GX SI Board - issue with the Board Test System (BTS)

We recently purchased several Stratix 10 GX Signal Integrity development boards and would appreciate your advice regarding an issue with the Board Test System (BTS). When attempting to program the F...
Board Debug
Fpga Devkit
sstrell's avatar
sstrell
Icon for Super Contributor rankSuper Contributor
5 months ago

Quartus Standard does not support Stratix 10, so it's no use to even try that.

Have you tried using the Quartus Programmer (in Pro or standalone) to manually program the device with one of the .sof files?

toni771's avatar
toni771
Icon for New Contributor rankNew Contributor
5 months ago

The Quartus Programmer can program the device successfully, but the BTS is not functioning correctly. When QUARTUS_ROOTDIR is set to the Quartus Pro installation, BTS gets stuck at “Setup connection to System Console server.” However, when QUARTUS_ROOTDIR is set to a Quartus Standard installation, BTS launches normally but is unable to program the device.