HSMC Specification

--- Quote Start ---

(If somebody is interested in an EAGLE footprint for this connector, let me know.)

--- Quote End ---

Hello fall!

Yes, I would be interested in the eagle-footprint! Could you somehow send it to me? Please contact me!

Thanks,

Maekja

--- Quote Start ---

Hello fall!

Yes, I would be interested in the eagle-footprint! Could you somehow send it to me? Please contact me!

Thanks,

Maekja

--- Quote End ---

Hi fall! I would also be very interested in this eagle footprint!! Thanks a lot for contacting me: michael@magictimelapse.ch

Hi, fall,

I am also interested in this eagle footprint. Would you

please send it to GXL2y@yahoo.com?

Thanks very much,

Kevin

--- Quote Start ---

Hi, fall,

I am also interested in this eagle footprint. Would you

please send it to GXL2y@yahoo.com?

Also, a starter's question:

I may need to build a test board with HSMC connector.

What's the best way to have the HSMC connector

mounted on the test board? (I may use expressPCB, so the

board will has no component on it) Is it possible to

mount it by myself?

Thanks very much,

Kevin

--- Quote End ---

The easiest way is to use the pin out board: http://www.bitec.ltd.uk/hsmc_proto.html

Michael79,

Thanks for suggestion.

I will take your idea. My approach will be a little bit different:

a board from TERASIC

https://www.terasic.com.tw/cgi-bin/page/archive.pl?language=english & No=322

it cost $55 a piece, $35 for shipping from Taiwan.

Best,

gl888

--- Quote Start ---

Greg--It was actually the user named "fall" who offered to make the Eagle footprints available. I've got them in Orcad, if that would help let me know. Otherwise I'm afraid you'll have to rely on fall...

--- Quote End ---

Hello PoeticLicense,

I would love the footprints in Orcad for the asp-122952-01 HSMC connector.

Thanks so much for any assistance.

cordellkelley@msn.com

-Kelley

FYI, the HSMC spec is available on the altera website now:

http://www.altera.com/literature/ds/hsmc_spec.pdf

Hi Fall,

Can you please send me the Eagle footprints for Samtec Connector (ASP-122952-01)? My email is pearl.ke.cao@gmail.com. Thank you very much!

--- Quote Start ---

I already have the Samtec Connector (ASP-122952-01) because i want to build an expansion board for the Cyclone III Development Kit. (If somebody is interested in an EAGLE footprint for this connector, let me know.)

The pinout/signal names for the HSMC connector is the point i'm interested in! Your proposal was the correct location: In the document "CycloneIII_SB_3C25.pdf" on page 11 you can find the HSMC connector.

Thanks!

--- Quote End ---

Is there anyway you could send me that footprint? It would be a huge help!

I'm at paulorecc@gmail.com

--- Quote Start ---

Greg--It was actually the user named "fall" who offered to make the Eagle footprints available. I've got them in Orcad, if that would help let me know. Otherwise I'm afraid you'll have to rely on fall...

--- Quote End ---

Any chance you could make the Orcad footprints available somewhere/somehow?

Thanks,

Alex