Forum Discussion

Cuong_Nguyen's avatar
Cuong_Nguyen
Icon for New Contributor rankNew Contributor
5 years ago
Solved

DE10-Nano ethernet port datasheet

Hi,

Please provide me a technical information about the RJ45 port (pinout, magnetics connections, magnetic polarity markings) of DE10-Nano board. I wonder if the polarity markings of the magnetics play an important role. My project utilizes Cyclone V SoC 5CSEBA6U23C7N and the ethernet chip KSZ9031RNX. When I plug the ethernet cable into the RJ45 port, the chip does not recognize the link. However, when I use the RJ45 port of the DE10-Nano (I remove the port out of DE10-Nano board and solder it into my board) it works. Thank you very much for all of your help.

3 Replies

    • Cuong_Nguyen's avatar
      Cuong_Nguyen
      Icon for New Contributor rankNew Contributor
      5 years ago

      Hi AabdRahman_A_Intel,

      I found another solution for my issue. Anyway, thank you very much for your help.

  • AR_A_Intel's avatar
    AR_A_Intel
    Icon for Super Contributor rankSuper Contributor
    5 years ago

    Sounds good, hope everything is working well at your side. This thread will be transitioned to community support. If you have a new question, feel free to open a new thread to get the support from Intel experts. Otherwise, the community users will continue to help you on this thread. Thank you