Forum Discussion
qwitza
Occasional Contributor
Occasional ContributorCyclone 5 first boot linux crashes, howto debug?
Hello, We have a design with a Cyclone V FPGA. Some boards only boot after a reset following power-on. Problem: The Debian Linux with U-Boot boots from the SD card, but after approximately 10 seco...
tehjingy_Altera
Regular Contributor
Regular ContributorHi
I got a feedback from the team.
The overlay method is not supported for the the CycloneV device.
You should use the "dd" method.
e.g.
dd if=sdcard/soc_system.rbf of=/dev/fpga0 bs=1M
You could find more details in the link below:
https://www.rocketboards.org/foswiki/Documentation/GSRD131ProgrammingFPGA
Regards
Jingyang, Teh
