Forum Discussion

qwitza's avatar
qwitza
Icon for Occasional Contributor rankOccasional Contributor
9 months ago

Cyclone 5 first boot linux crashes, howto debug?

Hello, We have a design with a Cyclone V FPGA. Some boards only boot after a reset following power-on. Problem: The Debian Linux with U-Boot boots from the SD card, but after approximately 10 seco...
Board Debug
Fpga Devkit
tehjingy_Altera's avatar
tehjingy_Altera
Icon for Regular Contributor rankRegular Contributor
9 months ago

Hi


Is it possible to share how you flash the FPGA firmware?

In normal case we do not suggest to flash the FPGA firmware after we boot into the linux console.


Regards

Jingyang, Teh