Forum Discussion

Vivek_tiwari's avatar
Vivek_tiwari
Icon for New Contributor rankNew Contributor
5 years ago

Configuration Error in Stratix 10 After programming .jic file

I Tried programming Stratix 10 FPGA kit with .jic file using jtag msel pins as MSEL[2:0] as 111 and it was programmed successfully configuration error led D3 was still glowing red after that i power ...
Vivek_tiwari's avatar
Vivek_tiwari
Icon for New Contributor rankNew Contributor
4 years ago

Hi,

Before I could download your JIC I flashed mine and looks like it got corrupted and board is getting heated and turning off after 5 mins.

Also not able to program anything and getting this error while trying to program .sof "device has stopped receiving configuration data"

If you know something about this please help.

Swapnil_29's avatar
Swapnil_29
Icon for New Contributor rankNew Contributor
4 years ago

I work with @Vivek_tiwari .

Also some additional data points- MAX_ERROR error led d3 glows for brief period of time say 1-2 mins and board is switching off.

@JohnT_Intel and other members- realty appreciate if we can get some pointers.

We are blocked and this Stratix10 GX Development kit is unusable for any program and development. Need critical inputs.

Thank you