Boot from EPCS (No NIOS)

Question

Is there a way to install a full-blow copy of u-boot into EPCS on a DE10-Nano to boot the board from it (without NIOS)? if yes how?Thanks!

shafiqy_intel · Answer

Hi ABoga1,I think the following link is a good example to configure U-boot to store environment in QSPI flash.https://rocketboards.org/foswiki/Documentation/GSRD131QspiBootI hope this will help.Thanks😉

Forum Discussion

Boot from EPCS (No NIOS)

1 Reply

Recent Discussions

AGILEX 5 cvp mode

Arrow AXE5 Eagle Board JTAG issue

PDN file and PCB decoupling

PCIe Example Design for Arrow EAGLE Board

CXL 2.0 support on the NEW Agilex™ 7 FPGA I-Series Development Kit (2x R-Tile and 1x F-Tile)