Forum Discussion

Icon for Occasional Contributor rank

Occasional Contributor

5 years ago

Solved

Arria 10 gx remote upgrade generic flash access using flash epcql1024 for board part no 10AX115S2F45

Can any explain or give example design for Arria 10 gx remote upgrade generic flash access using flash epcql1024 for board part no 10AX115S2F45

JohnT_Altera
5 years ago
Hi,

You may also refer to https://fpgacloud.intel.com/devstore/platform/16.1.0/Standard/board-update-portal-utilizing-epcq-flash-memory-reference-design/.

Icon for Regular Contributor rank

Regular Contributor

5 years ago

Hi,

You may also refer to https://fpgacloud.intel.com/devstore/platform/16.1.0/Standard/board-update-portal-utilizing-epcq-flash-memory-reference-design/.

APPU_appu
Occasional Contributor
5 years ago
Hii @JohnT_Intel

Thanks,

1.can u please explain me how to main.c code should be for nios booting. we are trying to boot but we not able to boot. can u explain me how to write that one.

2.how to configure the uart remote terminal/ remote terminal
APPU_appu
Occasional Contributor
5 years ago
Hi @JohnT_Intel

In this design there are using Ethernet IP but we want use uart in our design. So can give the example design with Uart IP. i reffered all the design whatever you given below link but we are not able to upgrade the flash.