Forum Discussion

VBalamurugan29's avatar
VBalamurugan29
Icon for New Contributor rankNew Contributor
6 months ago
Solved

Agilex 7 FPGA Short-Circuited Without Physical Damage – Need Guidance

Hello everyone, I’m working on a custom board with an Intel Agilex 7 series FPGA. Recently, the FPGA appears to have short-circuited internally, despite no physical damage to the chip or board. Key...
Board Debug
Fpga Devkit
  • Farabi's avatar
    Farabi
    5 months ago

    Hello,


    Please hold on we processing your FA.


    regards,

    Farabi


VBalamurugan29's avatar
VBalamurugan29
Icon for New Contributor rankNew Contributor
5 months ago

Hi,

Thanks for your reply.

  1. Yes, the DDR functioned normally when the DDR address was limited.

  2. No, I haven't checked the DDR address pins after the short circuit happened.

    (Note: This test was done before the short circuit occurred in the FPGA.)

  3. I understand that Failure Analysis (open/short/leakage tests) can be done.
    Yes, I would like to proceed with those tests to identify any failing pins.
    Please let me know the next steps.