Most RecentTransceiver Qsys generation through scriptHow to instantiate LVDS IOBUF by HDL for Arria10 device?what is the function of reset input signal for altera FPGA?I am using an Arria 10 GX and cannot get any signals out of bank 2L, the 3V bank. I can move the signals to bank 2K at 1.8 V and they are fine. The VCCIO for bank 2L is at 2.98V on all three pins but the bank is acting as though it is not active while allWhich is the supporting programmer tool for EPM7192GC160(MAX7000 series)?Stratix V board power cycled during fpga programming -->no longer possible to programI instantiaze a pll with 4 output clock,but when I use Derive PLL Clocks command in Timing Analyzer, it only derive two generated clock?Arria 10 SERDES with Global Clockhow about to generate a reset using a counter enabled by the locked signal of the pll ?how to instantiate the Altera v17.0 pll in the verilog file.can i get the instantiation code.
