Most RecentHi all I bought recently a Chinese development board for MaxII epm1270t144c5n (Mars-1270-Pro CoreBoard). There is on the board a crystal oscillator. I don't understand why output signal of oscillator is sent to a CPLD IO (IO 127) instead of GLCK input ?Error in Signal Tap Logic AnalyzerWill JTAG USB Byte Blaster II work with MAX10 at 3.0V VCCIO?Cyclone V Generic Flash Serial IP, connecting pins i want to connect the IP to the dedicated pins myself, How to do it?Intel Max10 as On-Board Intel FPGA Download Cable II Code for Cyclone10 GX programmingHow to make clk and loaden of external PLL for altlvds on cylone 10?I have a design using EP4CE15F23C9L which has 1.2 V connected to VCCINT (core voltage) instead of 1.0 V. This design is in production and has been operational for almost 10 years. I am wondering what kind of problems/effects this will have.I have required an Intel DSP board which support Intel MKL library and programming language is C. Along with that our requirement is 16 bit ADC and DAC with sampling frequency is in Mega sampleWhat kind of file for passive parallel load of Cyclone 10?What's the reason of “Write per-bit deskew fail” during DDR4 calibration
