acceleration

32 Topics

Intel N6001 FIM not compiling due to script failing
Hey @khtan, I am done testing the N6000 card, and wanted to test the N6001 design in the N6000 card without enabling the E810 Controller. Hence I started building and compiling the N6001 design, but the script fails. Traceback (most recent call last): File "/usr/bin/afu_json_mgr", line 5, in <module> from packager.tools.afu_json_mgr import main File "/usr/lib/python3/dist-packages/packager/tools/afu_json_mgr.py", line 35, in <module> from packager.utils.afu import AFU File "/usr/lib/python3/dist-packages/packager/utils/afu.py", line 37, in <module> from jsonschema import validators ModuleNotFoundError: No module named 'jsonschema' Error: "afu_json_mgr json-info --afu-json=/home/admin/test/intel-ofs-fim/ofs-common/scripts/common/syn/pim/dummy_afu/dummy_afu.json --verilog-hdr=../hw/afu_json_info.vh" failed Copying build from /home/admin/test/intel-ofs-fim/work_n6001/syn/syn_top/afu_with_pim/pim_template/hw/lib/build... Configuring Quartus build directory: afu/build Error running /home/admin/test/intel-ofs-fim/ofs-common/scripts/common/syn/build_fim.sh Exit code: 1 Below is the attached log file, any ideas as to what can be done are deeply appreciated. Thank you, Best Regards.
Solved
Beginner_in_FPGA
2 years ago Place Acceleration
11KViews
2likes
13Comments
N6000-PL MAX10 Build
Hi, I am currently building the N6000 MAX10 BMC provided in this guide, when running the script as mentioned in the guide "./build.sh" the script throws errors. I am not able to clear this error and the file is not present in the directory. Any ideas as what to do next is deeply appreciated? Thank you, Best Regards.
Solved
Beginner_in_FPGA
2 years ago Place Acceleration
15KViews
1like
21Comments
N6000-PL is not showing up in 'lspci'
Hey, I have with me the N6000-PL card which was provided by Intel. And am trying to test the card as is by connecting to a Dell PowerEdge R520 Server. This server is populated by a single CPU hence the card is connected to an x16 slot but the bandwidth available is x8, the server also doesn't support PCIe Bifurcation. In the Command prompt upon using lspci the card doesn't show up anywhere. And The power LED is green but the rest two LEDs "STS" and "ALM" are Red. 1) Is this common until I flash the MAX10 and Agilex FPGA with the BMC and OFS respectively? 2) Does this mean that the Board already has images preinstalled or is it a clean slate? Thank you, Best Regards.
Beginner_in_FPGA
2 years ago Place Acceleration
3.9KViews
1like
12Comments