Forum Discussion

K606's avatar
K606
Icon for Contributor rankContributor
9 months ago
Solved

Agilex5 EMAC to Fabric

I am trying to instantiate EMAC's that can be accessed over the Fabric: This builds successfully in the Qsys - however when adding it to the top level Verilog GHRD: ... wire outclk0_clk...
Arm Processor
  • K606's avatar
    K606
    9 months ago

    Hi I tried originally with 24.1 - now again with 24.3, and it works.

    Thanks,

    K

MattG_Altera's avatar
MattG_Altera
Icon for New Contributor rankNew Contributor
9 months ago

For completeness, what version of Quartus and the GHRD are you using?

Are you able to build the GHRD without making any changes?

As an experiment, I suggest trying to route just one emac through the FPGA.

  • K606's avatar
    K606
    Icon for Contributor rankContributor
    9 months ago

    Hi I tried originally with 24.1 - now again with 24.3, and it works.

    Thanks,

    K