Forum Discussion

JBayl's avatar
JBayl
Icon for Occasional Contributor rankOccasional Contributor
3 years ago
Solved

Preloader uboot SPL

Hi, We have a custom Cyclone V board that runs vxWorks. All boot images are coming from the QSPI with preloader separated from uboot. Preloader starts @ 0x0 location, u-boot @ 0x60000. I'm not...
  • Jeet14's avatar
    Jeet14
    3 years ago

    Hi Joel,


    Thanks for attending teams call.

    Let me know if you have any other query on this.


    Regards

    Tiwari


Jeet14's avatar
Jeet14
Icon for Frequent Contributor rankFrequent Contributor
3 years ago

Hi,


Please try Step by step procedure given in below link for Cyclone V SoC- Boot from QSPI-

https://www.rocketboards.org/foswiki/Documentation/BuildingBootloaderCycloneVAndArria10#Cyclone_V_SoC_45_Boot_from_QSPI


The only thing you need to take care is while generating your .sof file for your custom cyclone project & based on this you need to configure socfpga.dtsi & socfpga_cyclone5.dtsi


cv_bsp_generator.py script is used to take the sources from the handoff folder i.e. quartus hardware project, format them appropriately and copy them to the U-Boot source code


If still issue comes then I will setup a call on 1st June as next 2 days I am out of office.


Regards

Tiwari