Forum Discussion

Ragul's avatar
Ragul
Icon for New Contributor rankNew Contributor
2 years ago

Issue in booting DE10-nano with customized image

Error imgHi, Actually, My requirement is i need to boot my DE10-nano with my customized hardware design for that i followed a document which is recommended by you in before mail. Using quartu...
Hps Boot
  • Ragul's avatar
    Ragul
    Icon for New Contributor rankNew Contributor
    2 years ago

    Hello,

    Booting with GHRD design example's .rbf , .dtb, u-boot.img also I'm encountering same error which is mentioned in before post.

    Give me one proper document for how to boot the system with customized hardware design.

    I followed the below mentioned link to boot my system . It is also useless and also i encountered lots of errors while compiling preload-er, u-boot

    https://bitlog.it/20170820_building_embedded_linux_for_the_terasic_de10-nano.html

    My requirement is i need to configure GPIO's(0 & 1) for HPS .By default it is in FPGA .

    Sharing hardware design files for above requirement is appreciable.

    With regards,

    Ragul V.