New ContributorHello,
i added a new component in Qsys Project, it is an adder-block with 2 Inputs and one Output.
Through the ds-5 Debugger, i want to Access to the These two Inputs and one Output using their own Register. The Problem is : how can i find their Registers and how to give some Input values?
Thanks in Advance.
Billel
Regular ContributorHi,
Here is an example design that demonstrate the development of a custom logic component, writing the register SVD file, integrate it into the system, and eventually expose the custom logic’s registers in the DS-5 debug perspective, here:
https://rocketboards.org/foswiki/Projects/UsingCMSISWithCustomFPGALogic
More info on .svd files:
https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug_soc_eds.pdf#page=10
Here is a Simple DS-5 debug tutorial for your reference that demonstrate to debug a simple Hello World:
https://software.intel.com/en-us/node/720361
Regards.
