Forum Discussion
Ragul
New Contributor
New Contributorfacing issue with loading the EPCS file and SD milage file on DE10 nano board
Hi , Currently i'm working on DE10-nano board.My requirement is HPS should booted from SDcard and FPGA should booted from EPCS both should happen from at the same time or with delay also . but wrig...
Farabi_Altera
Regular Contributor
Regular ContributorHello,
For FPGA image, you need to convert to .rbf to load together with sdcard image.
No need to load FPGA image from EPCS.
link : https://www.rocketboards.org/foswiki/Documentation/CycloneVSoCGSRD
regards,
Farabi
