Forum Discussion

New Contributor

6 months ago

Error when scanning hardware - Server error

I want to communicate my MCVEVP SoC cyclone v FPGA with host PC. So i am using JTAG USB BLASTER cable to establish communication. I am getting the error "Error when scanning hardware - Server error" ...

Hps Boot

AdrianaI_Altera

New Contributor

6 months ago

Hi @Vinit_Khadakabhavi

Can you confirm the OS and Quartus edition you are using?

Have you tried using a different blaster cable?

Is that the only error that it shows or is there any other messages that the terminal shows?

Also, please see the following link and let me know if it helps your issue https://www.intel.com/content/www/us/en/docs/programmable/683076/current/troubleshooting-procedure-for-error.html

Vinit_Khadakabhavi

New Contributor

6 months ago

Hello, Thanks for the reply. I am using Windows 11 and Quartus Prime Lite 24.1 version. I tried with version 18.1 as well.

I haven't tried using a different blaster cable yet. Currently, I am using Altera USB Blaster Rev. C.

Yes, that is the only error the terminal shows.

Is there any way to resolve this? I have to try with new blaster ?

Forum Discussion

Error when scanning hardware - Server error

Recent Discussions

Unique ID registers in Cyclone V

Audio interface with Agilex 5 A5ED065BB32AI4S

Operating system kernel-level FPGA bridge communication

Routing PL DDR to PS

Validating ECC Functionality on Custom Agilex 5 SOM in Linux Kernel