Forum Discussion

Occasional Contributor

2 years ago

[Agilex]: Programming & Flashing FPGA File (.jic) to QSPI Flash from HPS through ethernet

Hi all, I have been using the below mentioned guide for porting u-boot and linux on agilex board Building Bootloader for Agilex 7 | Documentation | RocketBoards.org But, there is no information ab...

tehjingy_Altera

Regular Contributor

2 years ago

Hi Raju S

You could refer to the steps here in rocketboard.

https://www.rocketboards.org/foswiki/Documentation/AgilexSoCGSRD

In the article you could find the steps to use the programming file generator and also different method of flashing.

Regards

Jingyang, Teh

Forum Discussion

[Agilex]: Programming & Flashing FPGA File (.jic) to QSPI Flash from HPS through ethernet

Recent Discussions

Why does the system report an error when generating rbf from sof files and fsbl files?

Agilex5 HPS running bare-metal code does not access FPGA fabric

RTEMS for Agilex

Zephyr and FreeRTOS for Agilex7/9

Operating system kernel-level FPGA bridge communication