Forum Discussion

New Contributor

12 months ago

Access SD card from FPGA fabric in Agilex7

Hi, We want to prototype an open source RISC-V core running Linux in the Agilex 7 F-series development kit (DK-DEV-AGF014EA). The board has an SD/MMC socket which we want to use to provide the Linu...

Arm Processor

Jeet14

Frequent Contributor

12 months ago

Hi,

Nios® V core don't support MMU and MPU. Which are needed for Linux OS.

We do have plan for this support but this will be in next year end.

Right now Nios® V, you can use the freeRTOS, MicroC/OS-II RTOS. You can refer the below link for Nios® V Processor Software Developer Handbook.

https://www.intel.com/content/www/us/en/docs/programmable/743810/23-1/overview-of-embedded-processor-development.html

Regards

Tiwari

Forum Discussion

Access SD card from FPGA fabric in Agilex7

Recent Discussions

Unique ID registers in Cyclone V

Audio interface with Agilex 5 A5ED065BB32AI4S

Operating system kernel-level FPGA bridge communication

Routing PL DDR to PS

Validating ECC Functionality on Custom Agilex 5 SOM in Linux Kernel