Warning: field in quartus report that was not expected

Hi

I am using Quartus 19.1.0 (patch 0.02std) and DSP Builder with Matlab R2013a.

Executing 'Verify Design' in simulink with the 'Run Quartus Prime Software' option ticked gives the following error in the Matlab window.

<snip>

MyModel: Simulation Passed

[fit_success, fit_details] = dspba.runHWCompilation(MyModel, './')

Running ...

Executing 'C:\intelFPGA\19.1\quartus\bin64\quartus_sta.exe -t ../rtl/MyModel/MyModel_Source.tcl overwrite >quartus.out 2>&1' in './'

Warning: field in quartus report that was not expected: Required

with value: 280.033604032

> In C:\intelFPGA\19.1\quartus\dspba\Blocksets\BaseBlocks\extract_details_struct_from_csv_data.p>extract_details_struct_from_csv_data at 19

In C:\intelFPGA\19.1\quartus\dspba\Blocksets\BaseBlocks\run_quartus.p>run_quartus at 110

In C:\intelFPGA\19.1\quartus\dspba\Blocksets\BaseBlocks\+dspba\runHWCompilation.p>runHWCompilation at 95

In C:\intelFPGA\19.1\quartus\dspba\Blocksets\BaseBlocks\+dspba\verifyModel.p>verifyModel at 276

In C:\intelFPGA\19.1\quartus\dspba\Blocksets\BaseBlocks\+dspba\MatlabCommandCallback.p>MatlabCommandCallback at 27

Quartus Prime Compilation successful

--------------------------------------

<snip>

The verification then quits and does not provide any timing result.

Any advice on how best to deal with this would be greatly appreciated.

many thanks

Simon