VCS scripts to compile the Altera libraries

I'm not familiar with any specific scripts to set up the Altera libraries in VCS. However, I did find a useful design example on the Altera website:

http://www.altera.com/support/examples/vcs/exm-vcs-timing-verilog.html

Based on the TCL script that was provided, here's a snit it of the TCL file to setup your simulation:

vcs

# -R

# ## To invoke the GUI, use -RI option

-RI

# ## 64-bit version

# -full64

# ## record all the messages in a log file named test_net.log

-l test_net.log

# ## inlcude the path for libraries required for simulation

-v stratixii_atoms.v

# ## compile the test bench

test_multiplier.v

# ## inlcude the design files

multiplier.vo

# ## include these switches for transporting path delays and internal delays

# ## to get more information on these switches, refer to VCS Userguide

+transport_int_delays

+pulse_int_e/0

+pulse_int_r/0

+transport_path_delays

+pulse_e/0

+pulse_r/0

If you refer to the "include the path for libraries required for simulation", here's the command for adding the Stratix II device library for VCS simulation:

>> -v stratixii_atoms.v

Not sure if this helps, but just my two cents.

-Pld_wiz