Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Toplevel Simulation Control Signal And Retain Post-Fit Netlist

I am working on a large CycloneIII design using QuartusII v9.0. In our design we have a toplevel input simulation control signal that is routed to various aspects of the design. This simulation...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Thanks guys.

I will try setting a constant value on my virtual pin in the HDL and get back to you.

I suppose another way would be to feed the simulation control signal configured as a virtual pin at the toplevel through a register that is initialised to an inactive state at POR.