Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Timing Closure - Where to start

Hello All I have been handed a large (for me) FPGA design, which seems to have no timing closure, but has just been done.... and when tested on the hardware it appears to work. I have done the tut...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

I would start with the Quartus II TimeQuest Timing Analyzer chapter in the Quartus II handbook. If you are unfamiliar with timing analysis concepts, start by reading the Timing Analysis Overview section of this chapter. Then you can get into the tool specific setup.