Forum Discussion

choboja's avatar
choboja
Icon for New Contributor rankNew Contributor
3 years ago

Simulation waveform Editor error

Hi, I had a problem studying verilog alone The basic code was compiled well as shown in the picture below. Next, I simulated it, but all the code was completed successfully, but at the end, an ...
Simulation
ShengN_altera's avatar
ShengN_altera
Icon for Super Contributor rankSuper Contributor
3 years ago

Hi,

Tested without problem from my site check the screenshot and file attached. May be try to recreate the project.

Note 1: In vwf, goto Simulation -> Simulation Settings -> Timing Simulation Settings -> delete -novopt -> save.

Note 2: If you don't get output waveform, try to use older device because vwf is legacy simulator for older device.

Thanks,

Best Regards,

Sheng

p/s: If any answer from the community or Intel Support are helpful, please feel free to give best answer