Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

Simulation time settings.

Hi

Can anybody help me regarding to simulation time seetings..

For example..I am using clocked input so that by increase the simulation time all the inputs can be entered...

I m Using Quartus II 7.2 Web edition.

regards

Hasan

5 Replies

  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    17 years ago

    This is probably not going to help much, I think you need to be more clear. Do you mean you want to have a serial input, so that each cycle one portion of the input data is entered?

  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    17 years ago

    Hi..

    yes..

    I have taken few input as clocked input..

    So I want do some process using that input...

    Therefore, can anybody help me how I can increase the simulation time so that i can take more clocked (synchronize) input..and process that input and finally I can show that output within the simulation time..

    thank you for your help
  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    17 years ago

    You mean the simulation time setting in waveform editor?. It's Edit menu: End Time.

  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    17 years ago

    Hi....

    Yes how can I setting the wave form for increase the simulatuion time..??

    So that I can process the input and show the output within the simulation time
  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    17 years ago

    You can either set the end time, or advance the time as you want using the "run" command.