Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

Selecting MAX II GF parts with 1.8V in Quartus II 13.1.0 web edition?

Hi, I'd like to select an EPM570GF256C5N in the Quartus II 13.1.0 web edition, but it appears that no "G" variant is offered for selection. The non-G selection does not allow me to configure ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

Thank you Pete, this solved the issue.

I had to click on "Reset" in Operating Settings and Conditions/Voltage" to have the 1.8V take hold because the Fitter complained about 3.3V still even though VCCINT was shown now as 1.8V.

But now the design compiles and the log shows the G device correctly.

Thanks again,

Heinz