Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Save Project As

I have a working project in Quartus II web edition and I would like to have a new project that starts with the old one. It will use the exact same VHDL code but 3 pins will be reassigned. Is there a ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

pkolesni,

From the Quartus II GUI, you can go to File --> New Project Wizard. Then, on page 1 of 5, you can clock on the button "Use Existing Project Settings..." That will allow you to specify a starting point.

If that doesn't pull in the pin assignments, you can copy your pin assignments from your old QSF (in your project directory) into your new QSF. In this case, I would go ahead and create a new project so that your new QSF gets created. Then just copy and paste into it.