Forum Discussion

ArthurDent's avatar
ArthurDent
Icon for New Contributor rankNew Contributor
5 years ago
Solved

ModelSim INTEL FPGA STARTER EDITION supports only one user on linux

Hi We are using Quartus Prime Lite 20.1 .1 which includes Model Technology ModelSim - INTEL FPGA STARTER EDITION vsim 2020.1 . The tools are installed on a linux (CentOS 7) server which is the mai...
  • Nurina's avatar
    Nurina
    5 years ago

    Hi,


    You can use ModelSim - Intel FPGA Edition alone to perform simultaneous simulation with different users as you intended.


    If you install on two different machines I don't think you'd be able to perform simultaneous simulation with different users. It doesn't hurt to try though.


    Do you have any further questions?


    Regards,

    Nurina


Nurina's avatar
Nurina
Icon for Regular Contributor rankRegular Contributor
5 years ago

Hi,

We did not receive any response to the previous reply that I have provided, thus I will put this case to close pending. Please post a response in the next 15 days to allow me to continue to support you. After 15 days, this thread will be transitioned to community support. The community users will be able to help you with your follow-up questions.

Regards,
Nurina

PS: If you find any comment from the community or Intel Support to be helpful, feel free to give Kudos.

ArthurDent's avatar
ArthurDent
Icon for New Contributor rankNew Contributor
5 years ago

Hi Nurina,
thank you for your reply. The " ModelSim - Intel FPGA Edition Software License" cost 2000 USD, and it might not be possible to run "ModelSim - Intel FPGA Edition" and "ModelSim - INTEL FPGA STARTER EDITION" simultaneous.
Another possibility is to install "ModelSim - INTEL FPGA STARTER EDITION" on two different machines.
BR
AD