Forum Discussion

lucie-sharpe's avatar
lucie-sharpe
Icon for New Contributor rankNew Contributor
3 days ago

Error(23098) when using IPM_IOPLL on Agliex 7

I am trying to use the IPM_IOPLL in my project on the Intel Agilex 7 FPGA I-Series Transceiver Development Kit (6x F-Tile) but whenever i use it i get the following error: Error(23098): One or more...
Compilation
lucie-sharpe's avatar
lucie-sharpe
Icon for New Contributor rankNew Contributor
2 days ago

Here are my settings from Platform Designer. I have also tried the N,M and C values listed under Advanced parameters with no change.

 

ShengN_altera's avatar
ShengN_altera
Icon for Super Contributor rankSuper Contributor
1 day ago

what are your outclock_0 and outclock_1 frequency?

  • lucie-sharpe's avatar
    lucie-sharpe
    Icon for New Contributor rankNew Contributor
    1 day ago

    outclk_0 is 125MHz and outclk_1 is 62.5MHz which are used for the Intel TSE IP. outclk_2 is 31.25MHz which is used for IPBus communication.

    • ShengN_altera's avatar
      ShengN_altera
      Icon for Super Contributor rankSuper Contributor
      9 hours ago

      Seems like a bug for me. Let me further confirm and get back to you. I try other frequency like outclk1 100mhz, outclk2 100mhz and outclk3 100mhz, there's no problem. Seems like only certain frequency combination will cause issue.