Forum Discussion

mtrovato1's avatar
mtrovato1
Icon for New Contributor rankNew Contributor
3 years ago
Solved

Quartus Prime software (18.1) quit unexpectedly

Dear Sir/Madame, When building a project in quartus 2018.1 the GUI stops (32% of the fitter progress) and the message in the subject pops up. The report is below. Do you have any idea of what can be...
Compilation
  • RichardT_altera's avatar
    RichardT_altera
    3 years ago

    The "99.64% utilization..." statement was based on the 2019 design.

    The person who contacted Intel at that time was named Nathanael Huffman.

    I have also attached the 2019 design for your reference.

    Based on this information, my takeaway point is that the .INI file, provided in my previous reply, is derived from the 2019 design and should be safe to use in your current project. It has previously been verified by the engineering team in 2019.

    Best Regards,

    Richard Tan

RichardT_altera's avatar
RichardT_altera
Icon for Super Contributor rankSuper Contributor
3 years ago

I have sent you an .INI file via email last week.

Could you try to use the .INI file and see if it able to solve the internal error?


By the way, I can't compile the design as it is missing a lot of Qsys components. I believe these are all your custom IP. Could you please confirm if the .qar file is able to compile?


Best Regards,

Richard Tan


  • mtrovato1's avatar
    mtrovato1
    Icon for New Contributor rankNew Contributor
    3 years ago

    Hello RIchard,

    I have not received the .INI file. Could you attach it here or upload it somewhere so I can download it? You can also try sending the email again.

    Correct about the qsys. Please let me know if I can do anything to provide an archive project that can be compiled

    Best,

    Marco

    • mtrovato1's avatar
      mtrovato1
      Icon for New Contributor rankNew Contributor
      3 years ago

      Hello Richard,

      I have tarred the whole project. Can you untar and try to compile it?

      Thanks

      Marco