Forum Discussion

mtrovato1's avatar
mtrovato1
Icon for New Contributor rankNew Contributor
3 years ago
Solved

Quartus Prime software (18.1) quit unexpectedly

Dear Sir/Madame, When building a project in quartus 2018.1 the GUI stops (32% of the fitter progress) and the message in the subject pops up. The report is below. Do you have any idea of what can be...
Compilation
  • RichardT_altera's avatar
    RichardT_altera
    3 years ago

    The "99.64% utilization..." statement was based on the 2019 design.

    The person who contacted Intel at that time was named Nathanael Huffman.

    I have also attached the 2019 design for your reference.

    Based on this information, my takeaway point is that the .INI file, provided in my previous reply, is derived from the 2019 design and should be safe to use in your current project. It has previously been verified by the engineering team in 2019.

    Best Regards,

    Richard Tan

RichardT_altera's avatar
RichardT_altera
Icon for Super Contributor rankSuper Contributor
3 years ago

Dropping a note to ask if my last reply was helpful to you?

Do you see the issue reoccur with Quartus version 22.1?


Best Regards,

Richard Tan


  • mtrovato1's avatar
    mtrovato1
    Icon for New Contributor rankNew Contributor
    3 years ago

    Hello Richard,

    sorry for the delayed reply, I took few days off at work.

    Upgrading to 22.1 would be a lot of work and probably not worth the effort. We are only reorganizing the source file structure from one old project to the new one. The old project (same sources) compiles w/o any problems.

    I need a couple of hours in order to share the .qar file. Please confirm that you will still need it, even though I am not able to migrate to 22.1

    Thanks

    Best,

    Marco

  • mtrovato1's avatar
    mtrovato1
    Icon for New Contributor rankNew Contributor
    3 years ago

    Hello RIchard,

    please find the .qar in attachment

    Please let me know what you uncover.

    Thanks and Best,

    Marco