Forum Discussion
Honored ContributorQuantus II Programmer Auto Detect Problem with DE1-SoC
Hello,
I just bought a DE1-SoC. I wanted to program the board. While I am trying to program in the programmer window the "Auto Detect" remains inactive. I installed the driver (Blaster II) as told. The "Hardware Setup" window shoes DE1-SoC board. Unfortunately, The "auto detect" key is inactive or does not work. Can you please tell me why is it happening and how can I solve it. Thank you Momen http://www.alteraforum.com/forum/attachment.php?attachmentid=9932&stc=1 http://www.alteraforum.com/forum/attachment.php?attachmentid=9933&stc=16 Replies
lishiltonNew Contributor
thanks, guys! I appreciate it
Altera_ForumIt's because "No Hardware" is showing up at the top of the screen. Make you double click the DE-SoC in the Hardware Setup popup box. It should look something like this only yours will say DE-SoC
- Altera_Forum
You didn't setup download cable hardware correctly.
Farabi_AlteraRegular Contributor
"We sincerely apologize for the inconvenience caused by the delay in addressing your Forum queries. Due to an unexpected back-end issue in our system, your Forum cases, along with others, did not get through as intended. As a result, we have a backlog of cases that we are currently working through one by one.
Please be assured that we are doing everything we can to resolve this issue as quickly as possible. However, this process will take some time, and we kindly ask for your patience and understanding during this period. The cases will be attended by AE shortly.
We appreciate your patience and understanding, and we are committed to providing you with the best support possible.
Thank you for your understanding."
- Farabi_Altera
Hello,
Yes, please refer to ommunity.intel.com/t5/Intel-Quartus-Prime-Software/Unable-to-program-de1-soc-device-compilation-fine-with-no-errors/m-p/1633965#M84160 as suggested previously.
regards,
Farabi
