Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

Programmer freezes on BeMicro CV - used to work fine

Help! I have 4 BeMicro CV boards that all of a sudden do not program. The programmer freezes up until I unplug the USB cable. When I try to use the JTAG debugger tool, the same happens - the Quartus ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

Hello,

I found this solution on another forum and it fixed the issue.

Please rotate jumper J11 clockwise from the default 1-3 position(Vccio=2.5V) to 1-2 (Vccio=3.3V).