Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

Programmer freezes on BeMicro CV - used to work fine

Help! I have 4 BeMicro CV boards that all of a sudden do not program. The programmer freezes up until I unplug the USB cable. When I try to use the JTAG debugger tool, the same happens - the Quartus ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

For full functionality, you'll better connect the FPGA JTAG pins than the EPCS. According to the (incomplete) schematic in the "Hardware Reference Guide", they have test points. You'll possibly need to hold the MAX V in reset.