programmer doesn't see usb blaster

--- Quote Start ---

Having the same problem as the last poster. Tried the firewall setting and reinstalled blaster several times on different usb ports. Any help???

--- Quote End ---

Hello,

In my case, I actually solve my own problem regarding the usb blaster. Previously I mentioned that I installed quartus 13 and 10, and the usb blaster doesnt get detected anymore. It turns out the culprit was the quartus 10. I dont know how or why, but after uninstalling the quartus 10, the usb blaster get detected again. Hooray. Since i still can't get the .sof file, i finally decided that to get quartus 13 web version to get .sof file. Thankfully the usb blaster still get detected even after installing another version of quartus. I think to be safe just use the quartus 13 web version but it still does have a minor problem so i decided to keep the quartus 13 n the web version. Haha.

I'm a newbies. Sorry if my post doesn't help you.

I finally found the problem.

After trying to "add hardware" at the "hardware setup" in the programmer, I got the message “Attempted to access JTAG server -- internal error code 82 occurred”.

I ignored it all the time, but after an internet search, someone at this forum in an old thread, suggested to switch of the firewall software (thanks Embedos).

So I did. The error message disappeared en the USB blaster showed up on the "add hardware list". Ready to be chosen. YES.

So to be able to use the USB-blaster, you need to have a JTAG server. Usually this is the local machine. To find this server (my own PC!!!) I had switch off the firewall software. It's time to finetune this software.

--- Quote Start ---

It's time to finetune this software.

--- Quote End ---

If by "software" you mean Windows and if by "fine tune" you mean jettison, then I'm in 100% agreement :-)

Hi ,

Thank you very much std_logic_vector, it works for me. After I had all kind of issues installing in Windows 7 the USB Blaster, :DI went to this link http://www.altera.com/download/drivers/dri-index.html

this is a page about Cable & Adapter Drivers Information. I choose the one taht suits me, it leads you to a page with the instructions you need.

Then I had another error "attempted to access jtag server -- internal code 82 occurred" which I solve thanks to your post.

It worked for me, I hope il will be the same for the beginner like me!!!

I have a Samsung netbook running win7-starter. I read several threads and tried firewall settings and different versions of quartus programmer -- and had several frustrating days and many hours of lost work. One common thread seems to be the compatibility of windows & programmer versions. So ...

I tried different versions, in this order, 11, 10.1, 7.1, 7.2, 7.2sp3, 9.1.

All failed until version 9.1.

Now I turned the firewall back on (recommended settings in win7), and it still works.

Just thought I'd share this with you all. In this day where smart-phones are smarter than PCs from a few years ago, and millions of gadgets are running flawlessly everywhere, we still get stuck for days with junk like this.

Hello.

I was using Quartus II 13.0 vers before and successfully installed the USB Blaster. But the problem is it can't generate the .sof files since it was a trial version.

therefore I installed Quartus II 10.1 vers 64-bit that came along with the DE0 Nano box. And now the USB Blaster does not get detected anymore. It was installed on the device manager showing 'Altera USB-Blaster' but the Programmer doesn't detect it at all.

Can anyone help me? I would be grateful if anyone would at least reply to me.