Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

Programing 5M80ZE64C5N MAX V CPLD

Hi, I'm getting this error when I try to program the 5M80ZE64C5N MAX V CPLD: Info: Started Programmer operation at ... Info: Device 1 contains JTAG ID code 0x020A50DD Error: Can't recogn...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

I opened an oscillator example, compiled it and run the programmer, and now I get this error: 

Info: Started Programmer operation at Thu Sep 15 22:53:13 2011
Error: Can't configure device. Expected JTAG ID code 0x020A60DD for device 1, but found JTAG ID code 0x020A50DD.
Error: Unexpected error in JTAG server -- error code 44
Error: Operation failed
Info: Ended Programmer operation at Thu Sep 15 22:53:13 2011

So I verified the device and it is assigned to 5M570ZF256C5. It corresponds the ID from the Handbook, but unfortunately it isn't my device.

Kind regards

Pedro Ferreira