Programing 5M80ZE64C5N MAX V CPLD

Hi,

Yes, the programing file is *.pof.

I made an simple moore state machine with a Verilog template, just compile it without errors and open the programmer, it show me the *.pof file.

It must be *.sof? In the interactive tutorial it is programmed an *.sof.

What is the diference?

In the "JTAG Chain Debugger" I get this log:

Info: JTAG chain connection is good. Detected 1 device(s)
Info: Device 1: 5M(160Z|240Z|40Z|80Z)/..  (USERCODE: 0x00000000)

The same ID is shared with those 4 devices, as I said mine is 5M80ZE64C5N.

In the"Device support release notes (PDF)" of this version, it is written that is as compatibility with all of the MAX V devices.

Kind regards

Pedro Ferreira