Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Problem with programming in AS mode with Quartus rogrammer

Hi there, the problem is that the output .pof file from compilation is not correct, the message is: Error: Can't recognize silicon ID for device 1 I checked the default program of DE1 board a...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

From Quartus:

1 - Assignmentj->Settings->Device

2 - Click the "Device and Pin Options" button.

3 - Click on the "Configuration" tab.

4 - Make sure the "Use Configuration Device" dropdown box is set to EPCS4.

Jake