Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

problem printf with de2 basic board

Hi everyone, I have some trouble with my DE2 basic board. I can't do a printf using Nios II processor, Eclipse always return that the on-chip memory is overflow but with the DE2 basic the maxim...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

Start with an example that uses SDRAM. Make sure the configuration file built by terasic works. This tells you your hardware is OK.

After that, build that example and make sure it runs. Then make small incremental changes and test them every time. Keep copies of each stage and make notes so you can understand things if you go back to them later.