New ContributorI have a question regarding the routing of power to the VCC_ONE, VCCA and I/O power banks.
I am trying to implement a design for the 10M08SCE144A7G, all outputs will be 3.3TTL logic.
My question is, if I am not using any I/O pins from an I/O bank, do I still need to power the I/O power bank for the FPGA to work properly? Or can I just leave it unconnected?
Regular ContributorHi Luckyguide,
My apologies for overlooking your post. Yes, you must power all VCCIO banks, even if the I/O pins from a bank are not used.
You cannot leave any VCCIO pin unconnected.
Kindly refer to MAX® 10 FPGA Device Family Pin Connection Guidelines— Table 7, Page 17
Regards,
Fakhrul
Regular ContributorAs we haven't received a response to our previous notification, this thread will be transitioned to community support. We hope all your concerns have been addressed. If you have any new questions, please feel free to open a new thread to receive support from Intel experts. Otherwise, community users will continue to assist you here. Thank you.
