Forum Discussion

Luckyguide's avatar
Luckyguide
Icon for New Contributor rankNew Contributor
1 year ago

Power Routing

I have a question regarding the routing of power to the VCC_ONE, VCCA and I/O power banks. I am trying to implement a design for the 10M08SCE144A7G, all outputs will be 3.3TTL logic. My question ...
Compilation
FakhrulA_altera's avatar
FakhrulA_altera
Icon for Regular Contributor rankRegular Contributor
1 year ago

Hi Luckyguide,


My apologies for overlooking your post. Yes, you must power all VCCIO banks, even if the I/O pins from a bank are not used.

You cannot leave any VCCIO pin unconnected.


Kindly refer to MAX® 10 FPGA Device Family Pin Connection Guidelines— Table 7, Page 17


Regards,

Fakhrul