Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
10 years ago

Pin Planner group assignment problem

Hi,

In Pin Planner, after I drag a group signal (say, dataa[7..0] ) from the "Groups" tab to IOBANK 7, in the "All Pins" window, the "Location" and "I/O Bank" remain empty, while I expect them to be automatically filled with "IOBANK_7" and "7', respectively. What's the problem?

http://www.alteraforum.com/forum/attachment.php?attachmentid=10432&stc=1

2 Replies

  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    10 years ago

    I recommend you treat the pin planner very kindly (carefully) and assign individual signals - one at a time. dragging a group around it doesn't sound like something it's going to handle very well, even though it may well appear to support this.

    Cheers,

    Alex
  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    10 years ago

    Thanks Alex, I understand now, just to make sure I didn't miss any functional operations.

    Thanks again!