Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

No CFI table found at address 0x00000000

My SOPC has cfi_flash,and its base address is 0x0.But when I used the Flash Programmer in Nios IDE, it paused with No CFI table found at address 0x00000000 Leaving target processor paused ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

Hi

I tried like this

nios2-flash-programmer -g ro.flashs_ext_flash.flash --base=0x8000000

using cable "USB-Blaster [USB-0]", device 1, instance 0x00

Resetting and pausing target processor : OK

Checksum took 0.0z

erase not required

Program failed at offset 10001E

Leaving target processor paused

Error: Error code: 4 for command: nios2-flash-programmer "D:/web/webserver1/board_update_portal/software/web_server270813_bsp/flash/ro.flashfs_ext_flash.flash" --base=0x8000000 --sidp=0x8024E0 --id=0x0 --timestamp=1377500456 --device=1 --instance=0 '--cable=USB-Blaster on localhost [USB-0]' --program --verbose.