Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

No CFI table found at address 0x00000000

My SOPC has cfi_flash,and its base address is 0x0.But when I used the Flash Programmer in Nios IDE, it paused with No CFI table found at address 0x00000000 Leaving target processor paused ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

It is not an error, just cycle power or reset the board.

You could use the -g option of nios2-flash-programmer.