Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

Newbie learning Verilog - how to program a device in Quartus II

Hello, I am trying to learn Verilog / VHDL with a BeMicroSDK using Quartus II, and trying to compile program. The programs are from a forum post here that aims to blink LEDs. Using Quartus I ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

A typical newbie mistake would be to blink the LED at some frequency so fast that the human eye can not see. Or, possibly a mistake in your pin assignments.

Start by trying to just change the LED's with a fixed pattern (ON-OFF-ON.....) to see your first program have some effect on the hardware.