Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

need help on assembling the verilog modules on altera cyclone II de2

I am new to FPGA design. However, I have acquired all the modules that i need such as 'ampmain.v', 'signal_generator.v', 'display_generator.v', 'character generator', 'control_nios.sopc'. I have been...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

After the succesful project generation on SOPC builder. I went to the programmer where I can see the file to program. I clicked start and I got 100% successful.

Then on NIOS II, I build new project and selected the control_nios.ptf file as build earlier by SOPC builder. I had created the 'newtest.c' and try to build it. It build succesfully with no errors. However, I didn't see any .elf file on debug filder which is required to run on NIOS II hardware. I don't know what is the problem. I tried to rebuild it, clean project and rebuild. No use. At this point I tried to Run as> Nios II hardware. It gave me an error saying "NIOS II elf file doesnt exist".

My guess is I have some problem with control_nios.ptf file. But I don't know how to approach it at this point.

Here is the complete verilog and c files that i am using for this project. I would really appreciate it for any help..

http://www.megaupload.com/?d=gx7ogu40