Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

modelsim-altera had not updated result when you change the mif file in the RAM in QII

i made a test about simulating the RAM with .mif file once it was ok when first time setup the mif file to RAM. but when you changed one or more data of the mif during modelsim-altera is wor...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

are you starting ModelSim with NativeLink? in this case, Quartus is probably copying the .mif files to the simulation directory. try doing this manually without closing ModelSim